Product details
RCF SUB 9006-AS 7200W Peak 2x18" Active High Power Subwoofer Max SPL 142db: One of the most powerful 2x18" subwoofers in the field of live sound.
Featuring two high-power hyper-vented 18" neodymium woofers with 4.0" inside-outside voice coils, this cabinet delivers a serious amount of low frequencies. Powered by a 7200 W digital amplifier, the SUB 9006-AS can perform in the most demanding situations. The housing of the SUB 9006-AS matches the RCF D-Line HDL50-A and HDL10-A array systems, enabling to build stacked systems in a perfect combination.
Top end electronics
The amplifier integrates a low-noise 32-bit DSP circuit, controlled through the RCF proprietary RDNet network to easily handle the soft clipping limiters, RMS limits, polarity, amplitude, timing and equalisation. All the settings, monitoring and advanced features are available inside the RDNet Networked Management software. The available control panel on the back adjusts input sensitivity, Low Cut, Xover, volume, bypass, delay and presets selection. The regulated power supply guarantees full power from 100 V to 260 V. The amplifier houses on a unique Vibrostop floating aluminum panel for extra protection during transportation.
Hyper ventilation system
RCF manufactures these components to deliver the cleanest, punchiest, and undistorted low frequencies reproduction. The cone is composed of 30% carbon fibre, 20% fibreglass and 50% cellulose pulp. This particular chemical composition has been carefully developed to improve the robustness and rigidness of the cone avoiding any deformation that would result in a loss of efficiency. The 4.0" inside/outside voice coil is wounded on a strong fibreglass former and guarantees a more efficient cooling. The former is internally and externally reinforced with Nomex that stiffen the overall structure for a better energy transfer between the voice coil and the body cone. In order to dissipate the heat generated by the powerful voice coil, RCF engineers have developed the unique Hyper Ventilation system with very low power compression. The cone is water resistant.
Stacking HDL 50-A 4K or HDL 10-A
The cabinet is made of high quality birch plywood with every layer glued by a special water-resistant adhesive weatherproofing the cabinet. The heavily braced internal structure of the cabinet survives long-term use and transportation. Two separate acoustic chambers for the woofers and a separate housing for the amplifier guarantee the best components efficiency and reliability. Dual Stacking: horizontal to fit the HDL 50-A 4K while the vertical fits HDL 10-A.
Cabinet
The heavy-duty powder coated front grille integrates a central reinforcement bar and a special transparent-to-sound foam backing on the inside helps to further protect the transducers from dust. The subs are stackable and light-weight, for easy set-up and tear down. The SUB 9007-AS and SUB 9006-AS are equipped with 8 aluminum handles (4 per side) with ergonomic rubber handgrip. The transportation is fast with the detachable Kart kit: a dolly caster-board with rugged tour grade casters and rotating cam mechanism.
FEATURES
- 7200 Watt Peak power - 3600 Watt RMS
- 142 dB max SPL
- 30 Hz - 400 Hz frequency response
- 2 x 18" Woofer
- DSP controlled Input section with selectable presets
- RDNet remote control
- Delay control
- Baltic birch cabinet
ACOUSTICAL SPECIFICATIONS
- Frequency Response: 30 Hz ÷ 400 Hz
- Max SPL @ 1m: 142 dB
TRANSDUCERS
- Woofer: 2 x 18'' neo, 4.0'' v.c
INPUT/OUTPUT SECTION
- Input signal: bal/unbal
- Input connectors: XLR, RDNet Ethercon
- Output connectors: XLR, RDNet Ethercon
- Input sensitivity: +4 dBu
PROCESSOR SECTION
- Hi-Pass Frequencies: 30Hz, 40Hz
- Low-Pass Frequencies: Variable from 50Hz to 400Hz
- Protections: Thermal, RMS
- Limiter: Fast Limiter
- Controls: Gain, EQ, Preset, Phase switch, Output Delay Settings
- RDNet: Yes
POWER SECTION
- Total Power: 7200 W Peak, 3600 W RMS
- Low frequencies: 7200 W Peak, 3600 W RMS
- Cooling: Convection/Forced
- Connections: Powercon IN/OUT
PHYSICAL SPECIFICATIONS
- Cabinet/Case Material: Baltic birch plywood
- Hardware: 2 x M20
- Handles: 8 side
- Grille: Steel
- Color: Black
SIZE
- Height: 558 mm / 21.97 inches
- Width: 1188 mm / 46.77 inches
- Depth: 785 mm / 30.91 inches
- Weight: 86 kg / 189.6 lbs
A powerhouse of a subwoofer with in-your-face volume and clarity in a solid, durable construction.